New PGN Proposed - Window Shade Control

Proposed:

PGN set for window shade motor control including:

WINDOW_SHADE_CONTROL_COMMAND requested PGN 0x1FEDF
WINDOW_SHADE_CONTROL_STATUS requested PGN 0x1FEDE

Edit:
The following changes have been made to the Window Shade Control.
- Byte Numbering has been changed to 0 – 7 (Following comments reflect this change)
- Status Byte 0: Instances are available up to 250
- Status Byte 1: Updated to show field described group membership
- Status Byte 2: Now labeled as a Percent with reference to the correct table
- Status Byte 3: Exception Status bits have all been changed to Bit2 flags. These now exist on byte 3 & byte 6. Terms were also updated to ‘Forward & Reverse’. This describes the status of the motor running the shade as opposed to the direction of the shade movement
- Status Byte 5: The available last commands have been listed as well as a separate table explaining each command.
- Command Byte 0: Instances are available up to 250.
- Command Byte 1: Node Groups explained in addition to master groups.
- Command Byte 3: Available commands listed and explanation table referenced.
- Command Byte 3: Additional command “Tilt” added and explained.
- Command Byte 5: Momentary operation explained.
- Command Byte 6: Interlock function explained as a bitmap.

NOTE: Original File submission was removed to create account space (1Mb limit) to upload modified file. The original is available upon request.